March 21, 2014
Blog

Partial Below Grade Bowing Wall Repair

HJ3's StrongHold bowing wall repair system saved this homeowner 80% compared to replacement of their basement wall.

Basement Repair in New Jersey: Cost-Efficient Wall Reinforcement by HJ3

In New Jersey, basements are commonly situated either below or partially below the ground floor. In one residence, a partially below-grade basement faced a unique challenge. The sloped lawn surrounding it, when saturated with water, exerted additional pressure on the foundation wall. This article discusses how HJ3's certified Stronghold installer successfully repaired and reinforced the bowing wall, providing a cost-effective alternative to wall replacement, saving the homeowner over 80% in expenses.

Bowing Wall Issues Due to Saturated Soil

Prolonged heavy rains led to ground saturation, causing water accumulation at the foundation wall's base. The combined pressure from the soil and water exceeded the basement wall's capacity, leading to bowing. As the wall bowed, minor cracks developed, resulting in occasional leakage. Understandably, the homeowner sought a swift and reliable repair solution.

Efficient Wall Repair Process

The repair process began by preparing the interior surface of the wall. A mechanical grinder was used to remove any paint and loose concrete. The surface was then thoroughly cleaned to eliminate dust and oils. In the prepared areas, primer was applied, and pre-cut StrongHold™ carbon fiber strips were saturated with StrongHold resin before installation on the wall.

Swift and Cost-Efficient Resolution

HJ3's StrongHold certified installer efficiently completed the entire installation within just two days. Notably, the homeowner benefited from over 65% in savings compared to steel tie-backs and remarkable cost savings of more than 80% compared to full basement wall replacement. By reducing labor costs and time, the installer increased productivity, showcasing the effectiveness of the StrongHold system.

Learn More About StrongHold

To explore becoming a certified StrongHold installer or to receive further details about HJ3's StrongHold basement repair systems, please contact us at 1-877-303-0453 or via email at info@hj3.com. Your cost-effective basement repair solution awaits!

LATEST NEWS and BLOG

Learn More

The Truth Behind Compliant Composite Repairs: Matching Standards to Real-World Defects
Blog
October 30, 2024

The Truth Behind Compliant Composite Repairs: Matching Standards to Real-World Defects

Ensure the safety and durability of your assets by following essential repair standards for composite repairs, like ASME PCC-2, especially for high-pressure, high-temperature environments. However, matching repair designs precisely to defects is critical, as one-size-fits-all approaches may lead to failures. Avoid costly rework by providing engineers with detailed defect information to tailor repairs effectively. Learn more about aligning standards with real-world applications to enhance repair success.

How CarbonSeal Stacks Up To Competitors
Videos
October 16, 2024

How CarbonSeal Stacks Up To Competitors

Whether you are addressing corrosion, dents, or leaks, CarbonSeal™ provides a solution with fewer layers than competitors, reducing costs and saving time while conforming to ASME PCC-2 standards.Here’s how CarbonSeal™ stacks up to competitors.

get started

Request a quote, and we'll get back to you within 24 hours.

Request a quote